Kernel, Virus and Programming

Download論文一個click, 至少比Cityu無敵

launch.json in “.vscode” folder tasks.json “.vscode” folder Remove “-O” in Makefile run: set some breakpoints in vscode make qemu-gdb click the “run” button in vscode, see below

i know any gate can convert to NAND or NOR, asked many time why people always use NAND instead of NOR, no one can answer, but i found the answer now. NAND need voltage, NOR need current.

Buy from here. Offical website. Steps to make it work in arduino: 3. Burn these examples To try the wifi example 2. Change the wifi ID and password, case sensitive 3. Run it and see the result in serial monitor, set the baudrate to 115200. It grab the html from outside, see the code then […]

This little board is nearly the same size as nano but embedded with a NRF24L01, and also very cheap $4 USD. To make it works: The “RF24 > Scanner” will works like below 100% compatible with Arduino nano

3. Change the no of hart to 1 Result : Step over fully work

STK500 is better than MKII since it supports high voltage programming, it can reset fuses from any status. Step 1: Install the driver. Must be version from date 7th Oct Plug in the USB, if it detected wrong driver, update it by select specific folder’. Need reboot the computer to take effect. Step 2: connect […]

I got MKII ISP from here. To program Arduino Nano via Microchip studio, nothing special, remember have to select the chip. And Nano D8 pin is B0. Nano bootloader can be found in here.

Did it one more time and

Simplest steps To make the RGB led work, put on these three jumpers

Arduino To make it work in Arduino, don’t use adafruit SSD1306, you have to use SSH110X library. Run the example, no need to modify anycode.

This video works https://www.youtube.com/watch?v=Mt6U30Yxrr8&t=311s , sample code is in here.

this youtube works. Oled 0.91 and 0.96 inch both work. Oled can buy in here. The adafruit example is 128×32, need to change to 128×64 for 0.96 inch oled. One thing becareful, 0.96 oled 128×64, the address is still 0x3c, not 0x3d In Arduino IDE, change the address to “3C”, otherwise won’t work

Teaching always sharpen my knowledge, fill up all the missing gap of my skill

I found something:

https://www.ee-diary.com/2021/06/how-to-program-atmega328p-using-atmel.html

bought from here

Bought from here. user manual：           https://github.com/wuxx/icesugar-nano/blob/main/README.mdwin 7 serial driver：   https://github.com/wuxx/icesugar-nano/blob/main/doc/usbser.infsource and semantics：     https://github.com/wuxx/icesugar-nano Follow https://projectf.io/posts/building-ice40-fpga-toolchain/ . If you got this error: fatal error: ‘ftdi.h’ file not found, then modify config.mk in /Users/peter/workspace/icestorm: Edit /Users/peter/workspace/icestorm/iceprog/Makefile All examples in https://github.com/wuxx/icesugar-nano , just drag the demo program from demo folder or build it […]

This code can check I2C address from multiple devices

One LCD need to set the jump at back to have another I2C address

Got this board from Taobao. Follow https://randomnerdtutorials.com/installing-the-esp32-board-in-arduino-ide-windows-instructions. schematic：https://pan.baidu.com/s/1sNCK3Z4ZXfziKoF-ZYDMiw  Code：pxc4doc：https://pan.baidu.com/s/1SJFlgyIenaM4-TfmT1eLtQ  Code：NICE  or download here If you failed to run the code for this. Hold “Boot” button while uploading the code If you meet “the port doesn’t exist”, do:

STM32FEBKC6T6

MyFunction.c Control Code

Buy from here. Example is in here

We are developing our own risc-v so we need to have to ability to modify openocd. Here is the quickest guide for you to start when you type “set $s1=0xaabb”, it will jump to here

Buy from here https://item.taobao.com/item.htm?spm=a1z09.2.0.0.67002e8deFDqTo&id=630403001847&_u=bbuhab0778e , model is STM32F103C8T6

Tutorial: Create the project Step 1: Open STM32IDE, create the project, choose the right MCU Step 2: Type in project name Step 3: This is project structure Step 4: LED is assign to PC13, set it to GPIO output Then it will generate the setup code Step 5: Blink the led in main, there is […]